Chemical glass reactors can be divided into double-layer glass reactors and single-layer glass reactors. Why do many customers choose jacketed glass reactors when choosing glass reactor containers when purchasing?

 

In fact, as laboratory equipment, high borosilicate glass reactors, single-layer glass reactors, and double-wall glass reactors have good chemical properties, but single-jacketed glass reactors have a wider field of vision to observe the materials in the reactor. Reaction conditions, and can do high temperatures and low-temperature reactions, so customers choose to buy more large glass reactors.

S-100L Jacketed Glass Reactor	S-50L Jacketed Glass Reactor	S-30L Jacketed Glass Reactor
S-20L Jacketed Glass Reactor	S-10L Jacketed Glass Reactor	S-5L Jacketed Glass Reactor
S-3L Jacketed Glass Reactor	S-2L Jacketed Glass Reactor	S-1L Jacketed Glass Reactor

1. Sealed with polytetrafluoroethylene material and special rubber compound sealing ring, which can resist various solvents and maintain the high vacuum, which is very convenient to use.

2. High-efficiency condenser to ensure a high recovery rate.

3. Standardized connection method, easy to disassemble.

4. Equipped with a discharge switch, the solvent recovery is very fast.

5. Equipped with a vacuum gauge, you can choose the best working vacuum for low boiling point materials.

6, the structure is reasonable, pay attention to materials. The whole machine uses high-quality stainless steel, aluminum alloy and new synthetic materials, which has the advantages of anti-corrosion, anti-rust, and resistance to various solvents.

7. All glass parts are made of GG17 high-temperature resistant borosilicate glass material, which has good physical and chemical properties.

8. The electrical components are carefully selected, and all the main components are imported original parts.

9, electronic stepless speed regulation, motor without sparks, safe and reliable, long life.

F-2L Single layer glass reactor	F-3L Single layer glass reactor	F-10L Single layer glass reactor
F-20L Single layer glass reactor	F-50L Single layer glass reactor	F-100L Single layer glass reactor

1. Double-layer glass reactor turns on the power switch, the indicator light is off. The external power supply is not connected or the contact is poor. Please have a professional electrician check the power supply and socket.

2. Double-layer glass reactor fuse is short-circuited. Set the power switch to the OFF position and replace the fuse.

3. The double glass reactor power indicator is on, but it does not rotate. The rotating shaft is rusted. Stop using, contact the supplier. The motor, electrical box is faulty. The seven-pin plug is not connected. Reconnect the seven-pin plug.

4. The vacuum of the double-layer glass reactor suddenly disappears, the glass is cracked, and the switch is broken. Check the glass parts and replace the switch.

5. Double-layer glass reactor has a vacuum, but it cannot be pulled. The seal is worn and the vacuum switch is leaking. Please replace the seal and switch.

6. Double-layer glass reactor sometimes does not have a vacuum when there is dirt, and there are loose connectors on the steel shaft. Please remove the dirt and check the vacuum gauge and vacuum pump.

7. The double-layer glass reactor vacuum hose is aging. Please replace the vacuum hose.

8. The main shaft of the main body of the double-layer glass reactor is loosened left and right, and the top screw is loosened and tightened.

10. Double-layer glass reactor. Motor temperature is too high (room temperature plus 40 ° C is normal). Stop at overload. Turn the machine shaft by hand. Is it heavy? Vacuum grease.

11. The speed display of the double-layer glass reactor is inconsistent with the actual situation, the voltage is unstable, and there is an error in itself. Contact the supplier.

12. The shell of the double-layer glass reactor is charged, and the heating pipe has cracks and water. Please check with a professional electrician.