Double walled glass reactor - glass reactor supplier
The ZZKD jacketed glass reactor is manufactured according to the customer's actual requirements and new standards. It absorbs the advantages of similar products at home and abroad. The reagent was placed in the inner layer of a double-layer glass reactor while vacuuming and adjusting the mixing speed. The intermediate layer can cause the refrigerant, water, and high-temperature liquid to heat and cool the material. It can be used for experiments, medium-scale testing, and production of chemistry, fine chemicals, biopharmaceuticals, and new material synthesis.
The jacketed glass reactors produced by our company are S-10L, S-20L, S-30L, S-50L, and S-100L. The double-walled glass reactor of S-1L and S-5L is also produced.
Precautions
1. Before you use it for the first time, you must read the operating manual to operate the device correctly.
2. The power supply voltage must comply with the equipment regulations.
3. Do not operate the equipment at high speed under no-load conditions.
4. Ambient temperature and humidity can seriously affect the life of the digitizer. Please keep the inverter and motor dry.
5. Install the device first, then turn it on by a professional electrician. Make sure GND is grounded.
6. The converter or capacitor discharges within 5 minutes after the power is turned off, which may cause electric shock.
7. When handling glassware, pay attention to hard objects (watches, rings, belt buckles, etc.).
Introduction
Although our product is a borosilicate glass reactor, it has good chemical resistance. But can't afford your beat, please treat it gently, ensuring long-lasting use of glass reactor equipment.