Glass reactor for evaporation and reflux experiments
Through the double-layer glass reactor interlayer, constant temperature hot-melt medium or cooling medium is injected, and constant temperature heating or cooling is performed on the material in the reactor, and stirring can be provided. The material runs the reaction in the reactor and can control the evaporation and reflux of the reaction solution. After the reaction is completed, the material can be discharged from the outlet at the bottom of the reactor, which is extremely convenient to operate. It is the ideal equipment for modern chemical samples, medium sample experiments, biopharmaceutical, and new material synthesis.
Instructions for using jacketed glass reactors
● The power supply voltage must be the same as that specified by the instrument.
● Not suitable for high-speed operation under no load
● The life of the electrical box and the surrounding temperature and humidity have a great influence. Keep the speed regulation and the motor dry.
● Install the machine first, then wiring by a professional electrician, energize. The ground terminal must be grounded. The high-temperature bath must be connected to the circuit breaker.
● Within 5 minutes after the power is turned off, an electric shock may still occur due to the discharge of the inverter or capacitor.
● Pay attention to the impact damage of the hard objects on the glass during operation.
● Pay attention to the impact damage of the hard objects on the glass during operation.
● Be careful when connecting the vacuum pipe to the water pipe, so as not to break the glass with too much force and hurt the human body.
● When a high temperature circulating oil bath is required, pay attention to the high-temperature damage to the human body. In particular, pay attention to the high-temperature cycle, the circulation pump should be turned on first, and the heat transfer medium is running, and the temperature is slowly increased.