Jacketed glass vacuum reactor in china
Through the double-layer glass reactor interlayer, inject constant temperature hot melt medium or cooling medium, run constant temperature heating or cooling on the material in the reactor, and can provide stirring. The material runs the reaction in the reactor, and can control the evaporation and reflux of the reaction solution. After the reaction is completed, the material can be discharged from the discharge port at the bottom of the kettle, and the operation is extremely convenient. It is an ideal equipment for modern chemical sample, medium sample experiment, biopharmaceutical and new material synthesis.
Instructions for use of jacketed glass reactor
● The power supply voltage must be consistent with that specified by this instrument.
● No-load operation should not be run at high speed.
● The life of the electrical box has a great influence on the surrounding temperature and humidity. Please keep the speed regulation and motor dry.
● Install the machine first and then wire it by a professional electrician to power it on. The ground wire terminal must be grounded. The high temperature bath must be connected to the air switch.
● Within 5 minutes after the power is turned off, there may still be electric shock due to the discharge of the inverter or capacitor.
● Pay attention to the impact damage of the hard objects on the glass when working.
● Be careful when connecting the vacuum tube and water pipe, so as not to damage the human body by excessively breaking the glass.
● When high temperature circulating oil bath is needed, pay attention to the damage of high temperature to human body. It is recommended to use heat conduction oil with little harm to human body as the solvent. In particular, pay attention to the high-temperature cycle, you should first turn on the circulation pump, and let the heat-conducting medium run in a cycle, and slowly increase the temperature.